Skip to content

Emissions code

P0136: Downstream oxygen sensor circuit problem (bank 1)

How much to fix P0136? Typically $100–$350.

Typical repair range in the US · Estimate · Prices updated October 2026
$100 to $350
Typical range, estimate. Built from labor wages and part price bands.
How this range is built
Part of the jobLowHigh
Parts$40$180
Labor: 0.6 to 1 hours × $110 to $150 an hour$66$150
Fees: shop supplies, disposal, diagnostics$0$15
Total, rounded$100$350

The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in the US, $27.13 an hour, times 4 to 5.5 to cover what a shop bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.

This is the range for the most common fix, oxygen sensor replacement (one sensor). Which repair your car needs depends on a proper diagnosis.

The oxygen sensor behind the catalytic converter on cylinder 1's bank is not giving a normal electrical signal. This sensor checks whether the converter is cleaning the exhaust. A sensor fault here can set off a false converter code, so it should be sorted out first.

Safe to drive?
Usually yes, for now
Most common cause
Failed downstream O2 sensor

Does not affect drivability, so you can keep driving. The light will stay on and will fail emissions inspection.

Get quotes from local shops

Got P0136? Tell us your ZIP and a shop near you can quote the repair. Free, takes a minute.

Add a phone, an email, or both.

Fair Price is not a contractor or a repair shop. Who sees your request

What you may notice

Common causes, most likely first

  1. Failed downstream O2 sensor
  2. Damaged wiring or connector from exhaust heat
  3. Exhaust leak near the sensor
  4. Stuck or corroded plug

Check this first

Check the wiring near the exhaust for melted insulation. Ask if the code appears with other O2 codes.

Other repairs that sometimes fix P0136

RepairTypical range, US
Diagnostic scan (check engine light)$55 to $250
Catalytic converter replacement$430 to $2,325

Before you pay

Got a quote already? Check it against the range. Want to see if your car has a recall tied to this problem? Check recalls by VIN.

Need to read a code yourself? OBD-II scanners on eBay (affiliate link, disclosure).

P0136 questions

Does this mean my converter is bad?

Not by itself. The sensor is checked first, since a bad sensor can look like a failing converter. Replacing a converter based on this code alone could waste a lot of money.

Can I replace one sensor?

Yes, the one named in the code. On older cars, some shops recommend replacing them as a pair, but the other sensor may be fine, so ask what its live readings show before agreeing.

Why is the sensor stuck?

Exhaust heat and age wear down both the wiring and the sensing element. Wires run close to hot pipes, and insulation can crack or melt, which causes circuit faults like this one.

How much does it cost to fix P0136?

The most common fix, oxygen sensor replacement (one sensor), has a typical range of $100 to $350 across the US. It is an estimate built from parts prices and local labor wages, not a quote. Your car and shop change it.

Typical range in 10 metro areas

Only the labor rate changes between cities. Same parts, same hours.

AreaTypical range, estimate
Boston area, Massachusetts$110 to $370
New York City area$110 to $360
Los Angeles area, California$110 to $370
Chicago area, Illinois$100 to $350
Houston area, Texas$100 to $340
Dallas-Fort Worth area, Texas$100 to $340
Phoenix area, Arizona$100 to $350
Atlanta area, Georgia$100 to $350
Miami area, Florida$100 to $350
Seattle area, Washington$110 to $370

Related codes

More emissions codes

Code meaning written in our own words. Some codes mean different things on different makes, so check your scan tool or manual. Not a repair shop, estimates only.