Electrical
Ceiling fan or light fixture installation: what it costs in Massachusetts
How this range is built
| Part of the job | Low | High |
|---|---|---|
| Parts and materials | $30 | $200 |
| Labor: 1 to 2.5 hours × $105 to $145 an hour | $105 | $363 |
| Fees: shop supplies, disposal, diagnostics, permits | $0 | $75 |
| Total, rounded | $130 | $640 |
The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in Boston, $40.08 an hour, times 2.6 to 3.6 to cover what a contractor bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.
Not a repair shop, estimates only. Typical range, estimate. Not a quote. Your car, parts and shop change the number.
Replace or install a ceiling fan or light fixture, with a new box if the existing one cannot hold the weight.
Got a quote for this job?
Check it with the button above, or share what you were quoted so the range gets better.
What is usually included
- Remove old fixture
- Install fan-rated box or bracket
- Wire and mount new fixture
- Switch or remote connection
What moves the price
- Fan vs light only
- New wiring or new switch
- High ceilings or sloped ceilings
- Number of fixtures
Questions to ask before you say yes
- Is the box rated for a fan?
- Who supplies the fixture?
- Will you add a wall switch?
- Do you patch the ceiling?
Can you do it yourself?
Fixture swaps are a common DIY. Fan boxes and new wiring are safer with an electrician.
Common questions
Can I put a fan where a light is?
Not without a check. A fan needs a fan-rated box that holds its weight and motion. The electrician may swap the box, which adds cost.
Why is a fan more than a light?
A fan weighs more and moves, so it needs a stronger box. It also often needs wiring for a separate light and wall control.
How long does it take?
A simple swap takes about an hour. A new location with fresh wiring and drywall patching can take 2 to 4 hours.
How much does ceiling fan or light fixture installation cost in Massachusetts?
A typical range is $130 to $640. It is an estimate built from labor wages and material prices, not a quote.
Typical range in 10 metro areas
Only the labor rate changes between cities. Same parts, same hours.
| Area | Typical range, estimate |
|---|---|
| Boston area, Massachusetts | $130 to $640 |
| New York City area | $140 to $670 |
| Los Angeles area, California | $130 to $630 |
| Chicago area, Illinois | $150 to $690 |
| Houston area, Texas | $100 to $540 |
| Dallas-Fort Worth area, Texas | $100 to $540 |
| Phoenix area, Arizona | $110 to $550 |
| Atlanta area, Georgia | $110 to $540 |
| Miami area, Florida | $100 to $540 |
| Seattle area, Washington | $150 to $720 |