Car · Hyundai recalls

2010 Hyundai Santa Fe recalls

NHTSA lists 3 recall campaigns for the 2010 Hyundai Santa Fe, filed between April 28, 2011 and April 1, 2013. Each one is below with what is wrong and the free fix.

Check my VIN for open recalls

Campaign	Filed	Part
13V113000	April 1, 2013	Exterior lighting: switch
11E040000	October 6, 2011	Equipment
11V261000	April 28, 2011	Power train: driveshaft

Exterior lighting: switch (13V113000)

Filed April 1, 2013

What is wrong. Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.

What could happen. Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.

The fix. Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.

Equipment (11E040000)

Filed October 6, 2011

What is wrong. CURT MANUFACTURING IS RECALLING CERTAIN TOW PACKAGE WIRING HARNESSES, PART NUMBER 55538, THAT CONNECT TOW VEHICLE LIGHTING CIRCUITS TO TRAILER LIGHTING CIRCUITS SOLD FOR USE ON CERTAIN MODEL YEAR 2009 THROUGH 2011 HYUNDAI SANTA FE VEHICLES. THE UNITS ARE NOT WATER-TIGHT AND MOISTURE CAN SEEP INTO THE CONVERTER MODULE AND DEFEAT THE MODULE'S INTERNAL CIRCUIT PROTECTION.

What could happen. WITHOUT THE CIRCUIT PROTECTION, THE MODULE CAN OVERHEAT POSSIBLY RESULTING IN A FIRE.

The fix. CURT MANUFACTURING WILL NOTIFY OWNERS AND REPLACE THE TOW PACKAGE WIRING HARNESS. THE REMEDY WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 17, 2011. OWNERS MAY CONTACT CURT MANUFACTURING AT 1-715 831-8713.

Power train: driveshaft (11V261000)

Filed April 28, 2011

What is wrong. HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2010 SANTA FE 2WD VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS AND 2.4L ENGINES MANUFACTURED FROM OCTOBER 15, 2009 THROUGH MARCH 5, 2010. THE INTERMEDIATE SHAFT MAY SUFFER FROM NOISE AND EXCESSIVE WEAR DUE TO A MISALIGNMENT OF THE INTERMEDIATE SHAFT WITH THE RIGHT SIDE OUTPUT GEAR. CONTINUING TO DRIVE THE VEHICLE IN THIS CONDITION LEADS TO THE DEVELOPMENT OF A WHIRRING/WHINING NOISE AND CAN EVENTUALLY CAUSE DAMAGE TO THE AUTOMATIC TRANSMISSION.

What could happen. DAMAGE TO THE TRANSMISSION MAY CAUSE LOSS OF MOTIVE POWER, INCREASING THE RISK OF A CRASH.

The fix. DEALERS WILL REPLACE THE RIGHT SIDE OUTPUT GEAR AND INTERMEDIATE SHAFT FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING JUNE 2011. OWNERS MAY CONTACT HYUNDAI'S CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.

Check that your car is on the list

Most campaigns cover only cars built in a certain date range or at a certain plant, so a 2010 Hyundai Santa Fe may or may not be included. The VIN is the only sure test. It is 17 characters, on the dashboard by the windshield and on the driver door jamb sticker. Look up your VIN.

How to confirm the repair is free

Call any authorized Hyundai dealer service desk and give them the VIN and the campaign number from the list above.
Ask them to confirm the campaign is open for your car. If it is, the parts and labor are covered.
If the dealer says the part is not in stock, ask for a written note with the date, and ask about a loaner if the notice says not to drive the car.
Keep the repair order. It shows the campaign number and proves the work was done.

If you already paid for a repair that a recall later covered, Hyundai may owe you a refund. Ask the dealer or Hyundai customer service about reimbursement, and keep your receipts.

Other model years of the Santa Fe

More: all Hyundai recalls, check-engine codes, car repair costs.

2010 Hyundai Santa Fe recall questions

How many recalls does the 2010 Hyundai Santa Fe have?

NHTSA lists 3 recall campaigns for the 2010 Hyundai Santa Fe. A campaign can cover only some cars of that model year, so check your VIN to see whether yours is included.

Is a recall repair on a 2010 Hyundai Santa Fe free?

Yes. A safety recall repair is free at an authorized Hyundai dealer, whatever the age or mileage of the car and no matter who owns it now.

How do I know if my 2010 Hyundai Santa Fe was already fixed?

Enter the VIN on our recall page. If a campaign is still open, it shows as open. You can also ask a dealer to run the VIN, or look at the service history paperwork for the campaign number.

Source: NHTSA recalls API, checked 2026-10-28. Text is NHTSA's wording of each campaign. New campaigns are added over time. Not a repair shop, estimates only.